www.watchgas.eu
15
D e t e c t i o n
User Manual PDM PRO CO
2
Sustainable Single Gas Detector
D e t e c t i o n
•
Self Test(S)
Automatic self diagnose of the unit
•
Test order:
LED
->
Beep
->
Motor
->
Flash
->
Sensor
->
End
•
Factory Default(F)
Reset original settings and specifications
•
Time Write(T)
To set a time by user location (or sync to PC time)
•
Power OFF(P)
Turn off the device
•
IAP Version Read(I)
5.2.3 MENU - DEVICE (D)
5.2.3.1 MENU - DEVICE
•
Now Time - When you click the “Now Time” button, it automatically sets
the current time on the PC of the operator.
The initial time is preset in the
factory in South Korea, so to apply the time in your location, press “Now
time” and press “time write”.
•
Time Write by clicking “Time Write”
button, selected and customized
time will set.
Warning
-Before dissembling the detector, power it off.
-Maintanance can only be preformed by authorized service centers.
-It is absolutely prohibited to replace battery at potential explosion or dangerous regions.
-Unauthorized opening the detector and/or replacement of components will void intrinsic safety.
6. Maintenance
For maintenance please contact WatchGas or an authorized WatchGas dealer.
and refer to the service manual.
7. Battery Charging
• To charge the battery,
• Connect the USB-C type cable with the charging port at bottom of the
device.
• Connect the USB port with a provided adaptor (5V, 1.2A)
• While charging, the backlight illuminates.
• After the full charging, the back light turns off with full battery symbol.
• In the low battery, the alarm is activated every three minutes
Note
The device can still charge by connecting to a PC and the purpose of connection
is not for charging but for linking the PC program.
Warning
Only charge battery in non-hazardous environments , free of hazardous gas.
Only use the original USB-charger.
