Page 6
Figure 1
Flash
Dim
Flash
Dim
1. Select "Lighting" - "PIR Light
（
BLE+WiFi)".
2. Reset the floodlight by turning it on and off in the following
sequence: on-off-on-off-on (steps also displayed in your App).
Then, your floodlight will flash in intervals (Figure 1).
Add Manually
selection
If the light is flashing already,
please skip the reset steps.
Resetting the device:
1. Power on the device.
2. Turn on-off-on-off-on.
3. Make sure the light is flashing.
Note: Please complete the network
selection within 3 minutes after
resetting the device.
Confirm that the light is flashing.
