• As the temperature changes, the detection distance will be
affected.
• Do not mount the near a heat source like an air conditioner,
vent, furnace, exhaust, or in a direction facing any reflective
object / other nearby light source.
• Shut off power at the circuit breaker or fuse panel before
removing the old fixture or installing the new one.
• LEDs can be damaged by electric static. Before installing,
discharge any static from your body by touching a grounded
bare metal surface.
• To avoid damage, do not remove the clear lens over the LED
module.
Page 2
• Please read this entire manual before attempting to
assemble, operate, or install the product.
• Floodlight MUST be installed by a qualified electrician.
• Turn power OFF before installing.
• Do NOT touch or install fixture near water or if the
surrounding area is wet.
• Do NOT remove the protective LED lens.
• Do NOT look directly at lit LEDs for any length of time.
• Do NOT leave bare wires exposed.
• Electrical requirements: 120V, 60 Hz
• Do NOT allow the sensor head to touch the LED head
housing. Maintain at least 1 inch of space between the LED
heads and the sensor head.
• For proper operation and protection against water damage,
the motion sensor adjustment controls MUST be facing
downward.
• Do NOT mount below 5 ft.
Safety Instructions
Warnings
