Safety Information
• Disassembling the solar panel is not recommended as it may cause
damage to internal components. The solar panel may not function
properly after disassembly.
• Do NOT leave bare wires exposed.
Pre-Installation
1. Make sure your solar panel has been charged in direct sunlight for
at least 10 hours.
2. Remove any previously installed doorbell, mount, or backplate.
Page 2
Mounting the Solar Panel
You can mount your device directly onto wood using the screws provided.
If you are mounting onto brick, concrete, or stucco, mark the holes first
using the bracket, then drill the holes and insert the anchors before
screwing the mount into the wall.
