10.2.2
Changing the Integrated LEDs
Disconnect the power plug before starting any maintenance work.
•
To open the service covers [A] on the right and left side of the unit unscrew the four
screws [B] by using an Allen wrench.
•
Then loose the four knurled screws [C] of the cover [D] inside the unit .
•
The cover has not to be removed completely. It can be carefully hinged down and
placed on the engine.
•
Resolve the plug connection of the LED power cable.
•
Dissolve now the two knurled screws [E] and remove the defective LED strip from
the white retaining plate.
•
Then insert the plug of the new LED bar in the plug connector and tighten the new
LED strip with the knurled screws [E].
•
Now fold up the cover [D] and tighten the four knurled screws [C] inside the unit
hand-screwed.
•
Insert service covers [A] right and left and fix each with the two screws [B].
A
A
B
B
C
C
D
C
C
E
Summary of Contents for WP-Ex 10 II
Page 1: ...Polishing Compact Unit WP Ex 10 II USER MANUAL...
Page 18: ...Notes 18...
Page 19: ...19...
Page 20: ......
