Wassermann Wasi-Steam Classic II User Manual Download Page 6

 4  Responsibility for Operation or Damage

The responsibility for operating the unit lies exclusively with the owner or user if said unit is

incorrectly serviced, maintained or altered by persons not employed by an authorised 

dealer or if the unit is used in a manner contrary to its specified purpose.

The unit has to be maintained and operated in accordance with this user manual. 

Wassermann Dental-Maschinen GmbH is not responsible for damage arising from the 

nonobservance

 of these instructions.

Warranty and responsibility provisions contained in the sales and supply conditions of 

Wassermann Dental-Maschinen GmbH are not extended by these instructions.

 4.1 

Warranty 

The warranty period for our equipment is 12 months. If faults occur within the 

warranty period, contact your dental depot or get in touch directly with our service 

department.

Your equipment should only be operated in perfect condition. If faults occur which 

could harm operators or third parties, the unit should not be used until it has been 

fixed.

This warranty does not cover damage caused by improper use, external mechanical

causes, transport damage or interference with the unit by unauthorized persons.

 5  Application 

Because of its variable work pressure of up to 5 bar it offers the user a gentle but quick 

and thorough cleaning of all small parts in the dental laboratory. 

Only use the unit 

Wasi-Steam Classic II

 for this type of application.

6

Summary of Contents for Wasi-Steam Classic II

























Reviews: