Wassermann Wasi-Steam Classic II, User Manual, Page: 15 / 24

8.1.1 Refill the unit with water
●
After the red light (1) lights up, wait approx. 45 min. ( cooling down
period ) until you refill again, or else there is a risk of scalding as long as
the temperature remains above 100°C
●
Container must be pressureless ; produce a pressure balance via the jet
nozzle by operating the steam gun
●
Only now open the screw top (5) of the container carefully while pressing
down the screw top
●
Refill water ( 2 litres at most )
●
Operation with distilled / softened water is possible and is recommended
●
Fully tighten the screw top (5) of the container again (hand-screwed)
●
Switch on the temperature delimiter (6) (button under black cap on the
right side of unit) again as follows; first unscrew the black cap, then push
in the pushbutton, the red light (1) goes out and the unit heats up to the
adjusted pressure. Finally, screw the black cap back on
●
Heat-up phase (see p. 14)
●
Operational; i.e. steam blasting via the gun by operating the pushbutton is
possible until the temperature delimiter (6) activates again and the red
light (1) comes on
15