Wassermann Polyquick 260, User Manual, Page: 4 / 24

1 Features
• Compact table-top unit for pressure polymerisation up to 105°C in a water bath
• Very large capacity Ø 240 mm, usable depth 160 mm, suitable for extra large articulators
• Touch screen for fast and easy operation
• Up to three individually configurable polymerisation stages
• The device can also be operated as a pressure compactor
• Rapid draining: prompt switch between the two modes
• Separate menu for each mode
• Intelligent workflow preset by the software helps the user to ensure operational safety
• Remaining time displayed to the second
• Powerful, electronically controlled heating for optimal water temperature
• Pressure relief valve for protection in case of malfunction (7 bar)
• Safety lid with bayonet lock
• Dry-run protection
• Engraving in container indicating max. water level
• Time and cost saving due to thermal insulation
• Low maintenance, easy to service
• Made almost entirely of stainless steel
2 Safety Symbols used in this Manual
Warning!
This is a warning of risk situations and dangers.
Failure to observe this warning could be life-threatening. These warnings has to
be observed.
Information!
This symbol draws your attention to specific features that has to be observed.
4