Wassermann Polyquick 260, User Manual, Page: 15 / 24

Please put on heat-resistant gloves
During longer periods of non-use please disconnect the power plug.
8.2 Operation
•
Open the lid.
•
First set the workpieces, then fill the water till all the polymerisation parts are
covered (max. up to the engraving = Marking in the tank) and close the lid up to the
stop.
•
Switch on the main switch, the device will automatically heat up to 60°C or up to the
value selected as the pre-heating temperature. If warning appears, close the
lid.
•
Activate the pressure.
•
The process of polymerisation starts when you touch the symbol . After the
process of polymerisation has ended, the temperature falls/rises to the preset
temperature again.
15
A
5 6
5
6
A