Wassermann Polyquick 160-T120, User Manual

Page: 14 / 28

The Polymerisation
Stop/Pause Break-of Pause Back Start
Preheating temperature
Defines the target temperature once the main switch has been activated. The pre-heat
temperature also applies to waiting times and rest periods. Default: 60°C
If the programme temperature selected is higher, the temperature reverts back
to this value when the programme ends.
After defining the desired working mode , it may make sense to adjust the pre-heat
temperature of the programme temperature. This avoids long heat-up or cool-down
phases.
Preheating temperatures above 100 °C are not stored. When restarting, the
preheating temperature is 60 °C.
14
7
14