9 Operation
9.1
General Operating Instructions
All instructions for using the unit, whether in verbal or written form, are based on our
own experience and experimentation and can only be regarded as guidelines.
After you switch the trimmer on, wait a few seconds for the motor to come up to
speed. Only then can you use its full power.
Never push on the models so hard that the motor labours. This could overload it and
cause possible damage.
You should, of course, always work with fully set plaster models, as wet plaster can
cause blockages, especially in drain hoses.
9.2
Water Regulation
The water supply is regulated at the tap. The flow of water is sufficient if the grinding disc
is close to its natural colour when grinding.
When grinding, use light pressure only while moving the model to the right and left.
11
