Wassermann Gobi Classic, User Manual

Page: 17 / 24

10.2.7 Protection Filter Replacement
After some time of usage the filter inlet may become clogged. This filter inlet is situated
directly behind the filter block onto the blasting material container.
•
Unscrew and remove the rear panel.
•
Unscrew the screws of the filter block with the help of a 3-Allen key.
•
Change the filter inlet inside the filter block (just press lightly) and screw it back onto
the blasting material container.
10.2.8 Water Separator
The pressure reducer at the rear of the unit comes with an integrated water separator, that
absorbs any condensation coming out of the compressor. It must be checked regularly and
at the latest when the max. level is reached, it must be emptied. To do this, pull the beige
drain down so that the water can flow into the container you have placed under the unit.
17
Filter Block
Filter Inlet*
*(Item no. 610039 Small Filter Plate D14 X 1.5)