Wassermann 172980, User Manual

Page: 6 / 20

3 Safety Guidelines
Configuring and operating this equipment requires precise knowledge and observance
of the instructions in this user manual . The equipment is designed only for its intended
application.
WARNING:
Servicing and repairs should be carried out only by authorised specialists.
Disconnect the power plug before starting any maintenance work.
Make sure that the equipment is connected to the correct power source.
Always keep the two silicone components separated – never mix up the
connections! The mixing of components would cause the silicone within the
device to harden, making extensive repairs of the device in the Hamburg plant
necessary.
Drill a ventilation hole using a drill or similar tool at the upper side edge of the 1
litre bottle or 6 kg or 25 kg can. Do not tighten the caps of the 2 litre material
containers, but just fit them loosely to ensure proper ventilation.
After hardening and before further usage, fit a new mixing cannula.
WARNING: Never use with a hardened mixing cannula!
Note that while using bulk containers, the cans must be positioned at a height
higher than the device. Optional pad stands are available on request.
Leave about 2-3 cm minimal filling inside the containers to avoid air to get into
the system and the need for demanding bleeding of the device.
WARNING: It is very important to pay attention to this mimimal filling!
The pump must never be used without material (never “running dry”)!
6