background image

 4  Responsibility for Operation or Damage

The responsibility for operating the device lies exclusively with the owner or user if said 

device is incorrectly serviced, maintained or altered by persons not employed by an 

authorised dealer or if the device is used in a manner contrary to its specified purpose.

The unit has to be maintained and operated in accordance with this user manual. 

Wassermann Dental-Maschinen GmbH is not responsible for damage arising from the 

nonobservance

 of these instructions.

Warranty and responsibility provisions contained in the sales and supply conditions of 

Wassermann Dental-Maschinen GmbH are not extended by these instructions.

 4.1 

Warranty 

The warranty period for our equipment is 12 months. If faults occur within the 

warranty period, contact your dental depot or get in touch directly with our service 

department.

Your equipment should only be operated in perfect condition. If faults occur which 

could harm operators or third parties, the unit should not be used until it has been 

fixed.

This warranty does not cover damage caused by improper use, external mechanical

causes, transport damage or interference with the unit by unauthorized persons.

 5  Application 

Mixing and dosing of addition-vulcanazing 1:1 two component silicones. 

For even dosage of both components, both must have similar viscosity. 

Only use the device for this type of application.

7

Summary of Contents for 172980





















Reviews: