Waspper GF120, Operation Manual

Page: 3 / 14

2
Hazard levels
DANGER - Indication of an immediate danger potentially resulting in serious injuries or death.
CAUTION - Indication of a potential hazardous situation that may result in light injuries.
WARNING - Indication of a potential hazardous situation that may result in material damage.
Safety features
CAUTION - Safety features are designed to protect their users from injuries and these may not be altered
in any way or even put out of order
.
Any damaged items must be replaced with original spare parts only.
Protective guards on hot or rotating parts
The protective guards are designed for protection of operators using the high-pressure washer to avoid injuries
caused by temperatures of certain components of the combustion engine or injuries caused by rotating parts of
the device.
Safety features on the combustion engine and pump
The engine oil level safety switch (if fitted) serves for automatic deactivation of the engine in case the engine oil
level drops below the minimum threshold. That will prevent damage to the engine due to insufficient lubrication
of internal parts. However, this safety features does not substitute the need to check the engine oil level prior to
use of the device.
For further important information see the section – ENGINE (p. 3).
Scope of delivery
For depiction of delivery contents see the packaging or the purchase order. Check the contents completeness
when unpacking. Any items missing or any damages incurred in transport should be notified to the seller.
Additional items required
Source of clean water to fill water tank.
Assembly
The device itself is assembled in the manufacturing plant. Before connecting the hoses, remove the covers
from the high-pressure water outlet and inlet on the pump. The first operation requires connection of the high-
pressure hose, included in the delivery, with the control gun and nozzle to the high-pressure section of the
pump.
The next step requires filling of the supplied oil into the engine, as directed by instructions in the section
ENGINE (p. 3) and filling the tank with fresh petrol with octane rating of 95.
Commissioning
Water supply
CAUTION
Avoid operating the pump without a water in water tank. Minimum 20L of water is required for
engine start. If the purity of supplied water cannot be guaranteed, the system needs a water filter placed before
the pump inlet to avoid influx of solid contaminants inside the pump.
If the pump has not developed pressure within 30 seconds following its
commissioning, switch the engine off and proceed in compliance with instructions