Waspper GF120, Operation Manual

Page: 2 / 14

1
INDEX
Application compliant with the product design p. 1
Environmental protection . . . . . . . . . . . . . . . . p. 1
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 1
Scope of delivery . . . . . . . . . . . . . . . . . . . . . . p. 2
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 2
Commissioning . . . . . . . . . . . . . . . . . . . . . . . p. 3
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 3
Engine maintenance . . . . . . . . . . . . . . . . . . . p. 5
Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 6
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . p. 8
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 9
Technical data . . . . . . . . . . . . . . . . . . . . . . . . p. 9
Declaration of conformity in compliance with EU standards . . . p. 10
CAUTION
Please read this operation manual carefully before the first use of your device and pay attention to the safety
instructions attached. Please obey these instructions at all times. Keep the operation manual for potential future
use or the next owner of the device.
Application compliant with the product design
The use of this high-pressure washer is limited to:
– washing of machinery, vehicles, structures, tools, facades, gardening tools, etc. combined with a high-pressure
water supply (with added cleaning agents, wherever required);
– operation with accessories using spare parts approved by Waspper s.r.o.
- In an environment where the device will not be exposed to direct splashing of contaminated water with solid
particles.
- With sufficient amount of water in water tank. ( about 20L minimum.)
Environmental protection
The packaging materials are recyclable. Packaging disposal methods must comply with the environment-friendly
principles.
Used machines contain valuable and recyclable materials that can be reused. Any disposal of used machinery
must be conducted in environment-friendly manner.
Any cleaning works producing waste water contaminated with oil, e.g. cleaning of engines or floors of machinery,
may be only performed in cleaning facilities provided with oil separating equipment. Works with cleaning agents
are limited to working areas with proper sealing to prevent leakage of fluids and linkage to the contaminated
water sewers. Make sure to avoid leakage of cleaning agents into water resources or soil.
Safety
Safety Instructions
Make sure you read the "Safety Instructions for High-Pressure Washers” in full prior to the first use of this
device.
Noise reduction tools and protective glasses should be used for the convenience of operators for
hearing and eye protection purposes during operation of the cleaner.