WASPcam™ 9906 CAMO User Manual
01 June 2016
Page 8
Basic Camera Functions
Installing the Micro SD Card
To insert the SD card
With the camera off open the back cover
Slide the silver card lock down and gently pull up
Place the SD card in the slot
Close and push the card lock up to secure the card in place
**Note
–
Please use a minimum speed Class 10 card, maximum 64GB storage capacity .
WASPcam recommends using a brand name card such as Sandisk, Lexar, or Kingston.
Using a generic card can cause freezing/function issues.
Follow these steps in reverse order to remove the SD card
**Note
-
Please ensure that the SD Card is inserted in the correct direction or you may
damage the SD card and/or SD card reader.
Using the LED Lights
Press the LED Lights button
to turn on the LED lights in bright mode, press again for
normal mode, press a 3rd time to make the LED lights flash and press a 4th time to turn the
lights off.
Charging the Battery
Connect camera and power supply using the included USB cable. The red indicator at the
back of the camera will remain on while the camera is charging. Once it is fully charged the
red indicator light will turn off. When plugged into a power source, the camera will turn on
and off, and then begin charging. The camera can be turned back on to record while
charging.
**Note
-
To improve the charging efficiency of the camera, please turn the camera off while
it is charging
Turning the Camera On/Off
To turn on the camera, press the power button for 3 seconds. A chime will sound, the
WASPcam™ 9906 CAMO LCD screen will turn on and the red indicator light at the front of
the camera will also turn on. To turn off the camera, press the power button again for 3
seconds until the chime sounds and the screen goes black.
