WASPcam™ 9906 CAMO User Manual
01 June 2016
Page 10
Time
-
lapse Recording
In video mode press the menu button and use the right arrow to turn on Time
-
lapse Record
(for more options refer to Video Settings). Exit the menu and press the record button to
begin the time
-
lapse.
After 5 seconds (for example), the camera will take a picture automatically and begin
counting down from 5 seconds again. The camera will take photos every 5 seconds until the
user presses the record button to stop the time
-
lapse, the camera’s battery dies, or the
micro SD card is full.
The camera automatically saves all the photos it took during the time
-
lapse into a video file.
Each photo is one frame of video.
Motion Detection
1) In video mode press the menu button and use the right arrow to turn on Motion
Detection and choose 30 SEC for example (for more options refer to Video Settings). Press
REC to enter Motion Detection mode. The screen will say Motion Detecting.
2) If there is movement, the camera will auto record for 30sec (or the configured time) and
stop. If there is no movement, the camera will stop recording automatically. If there is
constant movement, the camera will detect this and the camera will keep recording in 30sec
intervals (or the configured time).
** Note – If you need to pause recording, press the record button once to pause. If you need
to cancel motion detection – please turn off this setting in the menu.
** Note – This setting will not work if the Loop Record is turned on
Image Rotation
If your WASPcam™ 9905 Wi
-
Fi camera is mounted upside down, enter the menu and select
Image Rotation. This will rotate the video/images being recorded 180°, and the screen will
show rotated images. Footage can also be rotated in most video editing software if required.
