Wasp WPL305, Programming Manual

Page: 34 / 120

Wasp Technologies.
28 Copyright 2001 All Rights Reserved.
Syntax
BARCODE X, Y, ”code type”, height, human readable, rotation, narrow, wide,
“code”
Parameter Description
X Specify the x-coordinate of the bar code on label
Y Specify the y-coordinate of the bar code on label
code type
128 Code 128, switching code subset A, B, C
automatically
128M Code 128, switching code subset A, B, C manually.
Control code A B C
096 FNC3 FNC3 NONE
097 FNC2 FNC2 NONE
098 SHIFT SHIFT NONE
099 CODE C CODE C NONE
100 CODE B FNC4 CODE B
101 FNC4 CODE A CODE A
102 FNC1 FNC1 FNC1
103 Start (CODE A)
104 Start (CODE B)
105 Start (CODE C)
Use “!” as a starting character for the control code followed by three control
codes.
If the start subset is not set, the default starting subset is B.
EAN128
Code 128, switching code subset A, B, C
automatically
25 Interleaved 2 of 5
25C Interleaved 2 of 5 with check digits
39 Code 39
39C Code 39 with check digits
93 Code 93
EAN13 EAN 13
EAN13+2 EAN 13 with 2 digits add-on
EAN13+5 EAN 13 with 5 digits add-on
EAN8 EAN 8
EAN8+2 EAN 8 with 2 digits add-on
EAN8+5 EAN 8 with 5 digits add-on
CODA Codabar
POST Postnet
UPCA UPC-A
UPCA+2 UPC-A with 2 digits add-on