Wasp WPL305, Programming Manual, Page: 55 / 120

Wasp Technologies.
49 Copyright 2001 All Rights Reserved.
FILENAME: The name of data file that will remain resident in the printer
memory. It is case sensitive.
DATA SIZE: The actual size (numbers of byte) of the data file without header.
Note:
(1). For text data file, CR (carriage return) 0x0D and LF (Line Feed)
0x0A is the separator of data.
(2). If memory is not specified, all files will be downloaded to DRAM.
No Battery is used to backup DRAM. The downloaded files in
DRAM will be lost in case turns off printer power.
Example
The program listed below will download to printer SDRAM.
DOWNLOAD “EXAMPLE.BAS”
SIZE 4,4
GAP 0,0
DENSITY 8
SPEED 6
DIRECTION 0
REFERENCE 0,0
SET CUTTER OFF
SET PEEL OFF
CLS
TEXT 100,100,”3”,0,1,1,”EXAMPLE PROGRAM”
PRINT 1
EOP
Note: When writing a download program, “DOWNLOAD” header must be placed
in the beginning of file, and “EOP” must be placed at the end of program.
To run the program, you can call the main filename without BAS
extension or use RUN command to start the download program.
Example:
1. Call the main filename
C:¥>COPY CON LPT1<ENTER>
EXAMPLE<ENTER>
<CTRL><Z>
C:¥>
2. Use Run command to start the program
C:¥>COPY CON LPT1<ENTER>
RUN “EXAMPLE.BAS”<ENTER>
<CTRL><Z>
C:¥>