xi
period of time, the battery will wear out and the longevity of the
battery will be at least half of one with frequent charges.
4.
Protect battery life by not over or under charging the battery.
5.
Please do not leave battery unused for
a
long time without charging it.
Despite Wasp’s safety precautions, the battery pack may begin to change
shape. If so, stop using it immediately. Please check to see if you are
using a proper power adapter to charge the battery or contact your service
provider for service.
6.
If you cannot charge the battery after it has been idle for an extended
period of time and it begins to heat up, please do not try to charge it. It
may not be functional anymore.
7.
Please only use the original battery from Wasp. Using a third-party battery
can damage our products. Please note that when such damage occurs, it
is not covered by Wasp’s warranty policy.
CAUTION!
RISK OF EXPLOSION IF BATTERY IS
REPLACED INCORRECTLY.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
如果更換不正確之電池行事會有爆炸的風險
請依製造商說明書處理用過之電池
如果更换不正确之电池行事会有爆炸的风险
请依制造商说明书处理用过之电池
Battery charge notice
It is important to consider temperature when the battery pack is charging.
Charging is most efficient at normal room temperature or in a slightly cooler
environment. It is essential that batteries are charged within the stated range of
0
°
C to 40
°
C. Charging batteries outside of the specified range could damage
the batteries and shorten their life cycle.
CAUTION!
Do not charge batteries at a temperature lower than 0
°
C. This will
make the batteries unstable and dangerous. Please use a battery
temperature detecting device for a charger to ensure a safe
charging temperature range.
Summary of Contents for WDT950
Page 1: ...Wasp WDT950 Handheld Terminal 38 Keys User s Manual v1 5...
Page 7: ...v Taiwan NCC Warning Statement SAR 2 0W KG 0 395 W KG 1 2 30 10 2 2 1...
Page 59: ...41 Wasp WDT950 38 keys User s Manual 2 9 2 Scene Mode Setting 2 9 3 Camera filter effects...
Page 60: ...42 Wasp WDT950 38 keys User s Manual 2 9 4 Settings Please tap to enter the settings section...