Enter/Exit Programming Mode
44
Wasp WDI7500/WWS750
Send Control Characters
This feature specifies how the reader transmits ASCII control characters to
for more information
about control characters.
Options are as follows:
Control Character 00 :
Characters from 00 to 0x1F are sent as control charac-
ter Ctrl+Keys, special keys are located from 0x80 to 0xA1.
Control Character 01 :
Characters from 00 to 0x1F are sent as control charac-
ter Ctrl+Shift, special keys are located from 0x80 to 0xA1.
Control Character 02 :
Special keys are located from 00 to 0x1F and characters
from 0x80 to 0xFE are intended as an extended ASCII table (see
DEFAULT
$CKBSC00(CR)
Wedge Send Control Characters = 00
$CKBSC01(CR)
Wedge Send Control Characters = 01
$CKBSC02(CR)
Wedge Send Control Characters = 02