10
Photos
Snap Shots
While you are recording video you can press the power button to take a picture
**Note -‐ when you are taking a snap shot, video is still being recorded continuously.
You can only view the snap shots in browse mode
1) Normal photo
Press Mode button until you see the camera icon in the top left corner. The white
balance, exposure and ISO icons will also show on the LCD screen
At the top right of the LCD screen the display shows the remaining amount of photos,
resolution, SD Card & battery icons. Press the record button to take a photo
2) Capture Mode Single/3s/10s/30s Timer
Press the menu button to enter camera settings, press the left and right arrow
buttons to choose capture mode and select the time, press OK button to confirm,
press the record button and the camera will count down the time you’ve selected
and then take a photo. Press the record button again to stop, or change the capture
mode to single
**Note -‐ when taking pictures – please try to hold the camera steady or it may affect
the picture quality
3) Auto Photo
：
off/3/5/10 seconds
Press the menu button to enter camera settings, press the left and right arrow
buttons to choose Auto Photo mode and select the time and press ok. Press menu to
exit. Press the record button once and the camera will take a photo at the chosen
interval continuously. The screen will show the countdown and when the time is up
the camera will take a photo automatically and then save the photo, then continue
photographing according to the time you set. To stop, please turn the auto photo
setting ‘Off’
4) Sequence Off/On (Photo Burst)
Press the menu button to enter camera settings, press the left and right arrow
buttons to choose sequence then turn it on press OK button to confirm, press Menu
to exit. Press the record button and the camera will take and save 3 consecutive
photos. To stop, please change the sequence setting Off
