Many of the system features are programmable. The Operation Settings Learn Routine
™
is used to access and pro-
gram the system features. You must program the transmitter before programming the system features.
To enter the Operation Settings Learn Routine:
1. Arm the system by pressing
.
2. Disarm the system by pressing
again.
3. Press and hold both buttons on the transmitter until the unit generates a long chirp.
The long chirp is followed by a short chirp indicating that you have accessed Feature
Number 1 in the Operation Settings Learn Routine
™
.
4. Release the transmitter buttons.
Repeat steps 3 and 4 to advance to the next feature. Each time you advance a feature, the short siren chirps will
indicate which feature number you have accessed.
5. Program the selected feature. Pressing Button I on the transmitter will select the one-
chirp setting and the siren will chirp once. Pressing Button II on the transmitter will
select the two-chirp setting and the siren will chirp twice. The default settings are the
one-chirp settings except where indicated by bold text.
After programming a feature, another feature can be selected by repeating steps 3 and 4. The Learn Routine
™
will
be exited if 5 seconds elapse between steps. The system will exit Learn Routine
™
immediately after the last fea-
ture has been selected. When the Operation Settings Learn Routine
™
is exited, the unit will chirp once followed by
a long chirp.
or
Feature One-Chirp
Two-Chirp
Number
Feature
Setting
Setting
1
Current Sense
On
Off
2
Current Sense Delay
5 seconds
5 minutes
3
Audible Arm/Disarm Confirmation
On
Off
4
Code Hopping
™
On
Off
OPERATION SETTINGS LEARN ROUTINE™
5
© 1999 Directed Electronics, Inc.
N718W 7/99
