15
ENGLISH
Error messages
The Wartmann®sous-vide stick automatically measures the water level. If the illumination ring shows a red
color, then an error occurred.
As soon as you plug the Wartmann®sous-vide stick into a socket, it will start measuring the water level. If you
do this while the Wartmann®sous-vide stick is still dry, it will give the error message Lo. Place the Wartmann®
sous-vide stick in the water (Mounting the Wartmann®sous-vide stick) and reset the Wartmann®sous-vide
stick by pressing the start / stop button. If you get the error message LO during use, then the water level has
dropped below the MIN indication. This can happen due to evaporation of the water. You need to fill the
water tank with extra water (Filling the Water container). You can reset the Wartmann®sous-vide stick by
pressing the start / stop button. If the color is red and flashing, then there is a malfunction. The Wartmann®
sous-vide stick needs to be repaired. You will see the error code Err1 (Temperature sensor open-loop) or Err2
(Temperature sensor short-circle).
Figure 6. Error messages.
Summary of Contents for WM-1508 SV
