5
SAFETY INFORMATION
FOR HEDGE TRIMMERS
DANGER
If the hedge trimmer blade jams or gets caught on an electrical cord or wires, DO NOT TOUCH THE
BLADE FOR ANY REASON!
IT CAN BE ELECTRICALLY LIVE AND CAUSE SERIOUS OR FATAL
INJURY! Release or drop the trimmer in the quickest, safest way. If possible
,
disconnect the battery from
the
tool.
If that is not possible, call an electrician
,
electrical contractor, or the power company for assistance.
Failure to heed this danger warning will cause serious personal injury and possible death.
Keep hands
away from blade
.
WARNING
Use both hands when operating the hedge trimmer. Using one hand could cause loss of control
and result in serious personal injury.
ALWAYS keep both hands on the hedge trimmer handles to
prevent your hand from touching the blade
.
•
Keep all parts of the body away from the cutter blade. Do not remove cut material or hold
material to be cut when blades are moving. Make sure the switch is off when clearing
j
ammed
material.
A moment of inattention while operating the hedge trimmer may result in serious
personal injury
.
•
Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or
storing the hedge trimmer always fit the cutting device cover.
Proper handling of the hedge
trimmer will reduce possible personal injury from the cutter blades.
•
Hold the power tool by insulated gripping surfaces only, because the cutter blade may
contact hidden wiring or its own cord.
Cutter blades contacting a” live" wire may make exposed
metal parts of the power tool "live
"
and could give the operator an electric shock
.
•
DO NOT operate the hedge trimmer when you are tired or your visibility is limited.
Do not use the
trimmer at night or in
reduced
light.
•
Keep cable away from cutting area.
During operation the cable may be hidden in shrubs and can be
accidentally cut by the blade
.
•
DO NOT use the hedge trimmer if the handle guard is damaged.
DAGNER
To avoid serious injury, risk of fire, explosion and danger of electric shock or electrocution:
•
DO NOT probe the charger with conductive materials
.
The charging terminals hold 120V.
•
If the battery pack case is cracked or damaged, DO NOT insert into the charger or tool. Replace
the battery pack.
•
DO NOT charge these battery packs with any other type of charger.
•
DO NOT allow liquid inside the charger.
•
DO NOT try to use the charger for any other purpose than what is presented
in
this manual.
