WINCH MANUAL
FIXIERUNG DES SEILS
21
DE
die Gänge einzulegen. Drücken Sie die Seilausgabetaste an der
Fernbedienung. Wenn sich die Trommel dreht und das Seil freigibt,
sind Ihre Anschlüsse korrekt. Wenn sich die Trommel dreht und das
Seil erfasst, kehren Sie die Anschlüsse um. Wiederholen Sie den
Vorgang und überprüfen Sie die Rotation.
FIXIERUNG DES SEILS
Finden Sie eine passende Befestigung, z. B. einen ausreichend starken
Baumstamm oder Felsbrocken.
Verwenden Sie IMMER eine Schlinge oder einen Gurt als Anschlagpunkt
an einem Gegenstand. Verwenden Sie niemals das Seil oder den Haken als
Anschlagpunkt.
VORSICHT
Befestigen Sie den Gabelkopfhaken NIEMALS am Windenseil, da dies
zur Beschädigung des Seils führen kann.
VORSICHT
Benutzen Sie die Winde nicht in einem spitzen Winkel, da sich
dadurch das Seil auf der einen Seite der Trommel stapelt, wodurch
das Seil und die Winde beschädigt werden können.
HINWEIS
Es können kurze Züge in einem Winkel verwendet werden, um das
Fahrzeug/die Ausrüstung gerade auszurichten. Lange Züge sollten mit
dem Seil in einer geraden Linie zur
Winde/zum Fahrzeug ausgeführt werden (siehe Abbildung oben).
VORSICHT
Wenn Sie eine schwere Last ziehen, legen Sie eine Decke oder eine
Jacke über das Drahtseil, etwa einen Meter vom Haken entfernt, da
dies im Falle eines Kabelbruchs die einwirkende Kraft dämpft.
Für zusätzlichen Schutz öffnen Sie die Motorhaube des Fahrzeugs wie
in der Abbildung dargestellt.
HINWEIS
Bei Lasten über 70 % der Nennzugkraft empfehlen wir die
Verwendung einer Flaschenzuges / einer Umlenkrolle, um die
Zugkraft des Drahtseils zu verdoppeln. Dadurch wird die Winde
entlastet und das Seil geschont.
Einzelseil
Doppelseil
GEFAHR
Verwenden Sie Ihre Winde niemals zum Heben oder Transportieren
von Personen oder zum Transportieren von lebenden Tieren.
WINDENEINSATZ SCHRITT FüR SCHRITT
a. Nehmen Sie sich Zeit, um Ihre Situation zu beurteilen und den Einsatz
der Winde zu planen.
b. Ziehen Sie Handschuhe an, um Ihre Hände zu schützen.