background image

ILEA A/B Series electric actuators 

ILEA-A

xx

ILEA-B

xx

ILEA A/B SERIES IOM

ILEA-A/B_IOM_NoRev_1118

92500136 No Rev

TABLE OF CONTENTS

Function ...................................................................... 2
Symbols and Safety ................................................ 2
Danger Signs ............................................................. 2
Usage As Per Specification ................................... 3
Basic Specifications................................................. 3
Operating Conditions and Installation ............ 3
Removing/Closing the Cover .............................. 4
Wiring Diagram ........................................................ 4
High Voltage Power Supply ................................. 4
Electric Supply .......................................................... 5
Mount Add Pos Switches Mech/Relays ........... 5
DIP Switch Functions/Settings ........................... 6

Manual Operation ................................................... 6
Actuator Parts Identifications ............................. 7
Actuator Removal Instruction ............................. 7
Removing/Replacing of Actuator ...................... 8
Operator Push Buttons .......................................... 9
Operating Direction .............................................10
Status Display .........................................................10
Commissioning/Operation ......................... 11-12
Maintenance ...........................................................12
Decommissioning/Disposal ..............................12
Usage and Storage ................................................13

Preliminar

y

Summary of Contents for ARIA Series

















Reviews: