4
Warner Electric • 800-825-9050
P-273-4-WE • 819-0528
Figure 2b
Mounting to a Reducer
1. Warner Electric UniModules are furnished with a
hardened key pre-mounted on the output shaft.
2. Align the output shaft and key of the module
with the corresponding bore and keyway of the
reducer. Slide the assembly together as shown in
Figure 3.
Figure 3
3. Bolt the module to the reducer flange. The four (4)
bolts that are required (3/8-16UNC2A) are typically
provided with the reducer. Tighten to 18-22 foot
pounds of torque.
Installing the Base Mount
Model 2030 and 3040 UniModules are designed to
be base mounted as shown in Figure 4.
Figure 4
Optional Base Mount Kit,
Warner Electric part numbers:
UM-50/100...........................5370-101-004
UM-180................................5370-101-002
1. The pilot diameters on each end of the UniModule
will mate with the pilot diameters on the base.
2. Secure the base to the UniModule with the four (4)
bolts provided. Tighten to 18 to 22 foot pounds.
