I.
TABLE OF CONTENTS
Parts
List page
2
Tools
Required
page
2
Torque
Specifications
page
2
Installation
page
2-8
Maintenance/Care page
8
II. PARTS LIST
Part Number
Qty
Description
75733
1 Hardware
Kit
75728
1
RH Rock slider
75729
1
LH Rock slider
III. TOOLS REQUIRED
-Standard Socket Set
-3/8
Racket
-Standard Wrench Set
-Standard Screw Driver
-Drill Motor
-3/8” and 5/16” Drill bit
IV. TORQUE SPECIFICATIONS
5/16” 18 lb. ft. (24.4 N-m)
3/8”
35 lb. ft. (47.5 N-m)
7/16
50 lb. ft. (67.8 N-m)
V. INSTALLATION
1. Remove factory components (if so equipped)
Remove the factory side boards, steps, or other rock sliders from vehicle.
Clean side rocker panels under the doors
2. Prepare the sides of the vehicle
Using a 3/8” drill bit and drill motor, carefully drill out the factory mounting holes as shown in
Figure 1
.
WARN INDUSTRIES
PAGE 2
75732 A0
WARNING
Drilling operations can cause flying chips.
WEAR SAFETY GOGGLES.
Flying chips can cause eye injury.
