WARN® INDUSTRIES
PAGE 5
68196 Rev A4
V. Maintenance/Care
•
Inspect all metal parts on the plow, plow mount, and related hardware prior to each use. Replace all parts that
appears rusted or deformed.
•
Inspect all nuts and bolts on the plow, plow mount, and related hardware prior to each use. Tighten all nuts
and bolts that appear to be loose. Stripped, fractured, or bent bolts or nuts must be replaced.
•
Check all cables prior to use. Replace cables that are worn or frayed.
•
Check all moving and rotating parts. Remove debris that may inhibit the part from moving freely.
WARNING
Failure to perform regular inspections and maintenance on the plow, plow mount, and related
hardware may result in vehicle damage and operator injury or death.
The following replacement parts are available for purchase:
Part #
Description
Notes
39415
54” Wear Bar
1x 38734
62601
60” Wear Bar
1x 37098
69212
Heavy Duty Skid and Pin
2x 68820, 2x 25397
Contact your nearest WARN dealer for ordering. To find a dealer nearest you, contact the WARN dealer locator
line at 1-800-910-1122.
If you are having problems with your plow, please follow the steps below:
1.
Reference the installation instructions for tips or notes.
2.
Contact the dealer where you purchased the kit.
3.
Call an authorized WARN Service Center from the warranty sheet included in the kit. Please have the
following information available before calling; part number (listed on front of instructions), date of purchase,
and make, model, and model year of ATV.
4.
Contact WARN customer service at 1-800-543-9276 or www.warn.com. Again, please have the following
information available before calling; part number (listed on front of instructions), date of purchase, and
make, model, and model year of ATV.
