I N S T A L L A T I O N I N S T R U C T I O N S
4
1.
Use a body pry tool to remove the plastic covers around the tow hooks to access the bolts behind them. Use an 18mm socket to remove
the four (4) bolts on each side of the bumper. (Figure1)
Note: If truck is equipped with an Adaptive Cruise Control sensor it will have to be removed before you can access the bolts behind it.
Figure 1
2.
Use a 15mm socket wrench to remove the four (4) bolts (two on each side of the bumper) holding the support brackets to the frame.
(Fig. 2)
Figure 2
3.
Unplug the fog light wiring harness and remove the bumper from the truck.
