©2016 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
5
101246A0
I N S T A L L A T I O N I N S T R U C T I O N S
3. Insert the two carriage bolts ( B7) through the backside of
the winch mount as indicated in photo.
4. Slide plow mount into position, between the two tabs on the
front lower frame.
5. Align the holes in the front of the plow mount over the
carriage bolts previously installed and secure with washer
(B6) and nut (B5).
Do not tighten at this time.
6. Mark lower outter corners of front plastic to cut.
Bolts (3) each side
Lower frame tab
Fairlead
Carriage bolts
Figure 4
Figure 5
Figure 6
