Mounting/Positioning
4
Loosen both screws to
the left of the
4iE and
remove the Back Plate.
Install square 2
3
/
4
” deep
back box with a single
mud ring (also called
plaster ring) in your
preferred thermostat
location.
4iE Portrait
Step 1 - Install Back Plate
1
Before making any permanent fixtures Warmup recommends
identifying your preferred location for the
4iE. It should be
located in an area with good ventilation. It should not be beside a
window/door, in direct sunlight or above another heat generating
device (e.g. radiator or TV).
For the WiFi enabled 4iE, ensure the distance from your router to
the 4iE is not too great. This will reduce the risk of signal strength
and interference issues.
Faceplate
Thermostat
Trim plate
Mount faceplate vertically
Deep double-gang box recommended
Dr ywall
2
