Registration
12
Below shows the menu structure to follow, when first registering
with the MyHeating App or my.warmup.com
4iE Portrait
(WiFi Version)
Step 6 - Registering your device
Location
A location needs to be setup before a room can be configured and
the 4iE device registered. Creating a location is user friendly and
easy to follow. It is advised to have details of your current energy
tariff and pricing to hand, as these will be required for the energy
monitoring features.
Room
With a location now setup, the next step is to register a room.
When creating a new room, you must enter the following
information:
Location
(Select the newly setup location)
Room name
(Description, e.g. Upstairs Bathroom)
Room type
(Select the room type e.g. Bathroom)
Floor type
(Select the floor type e.g. Tile/stone)
Device number
(See page 11)
System type
(Select e.g. ’Electric Underfloor’
System power
(Size of heat source e.g.1000W)
Power source
(Energy source e.g. gas/electricity)
NOTE: Please ensure you enter the correct System Type and Wattage
of
heaters connected. If a relay has been installed please set
System Type
as
El Relay.
Registration
Once the App has been successfully downloaded and device
number recorded you will need to set up your MyWarmup account.
The Thermostat can be registered via the MyHeating App or by
visiting my.warmup.com
