The next step is to select a Wi-
Fi network and enter the
password for it. Click Next.
ATTENTION! Be sure to enter
the password for your Wi-Fi
network correctly. Otherwise, it
will not be possible to connect
the heater with the applica on.
Press the "Confirm the indicator is
blinking" bu on. Then
select indicator status
(the way the icons flash on the
display): Blink Slowly
(for AP mode - slow flashing icon)
Blink Quickly (applies to EZ mode -
fast flashing icon )
If you choose AP Mode connec on,
you need to change network source
on your device to Smart Life-XXXX
or SL-XXXX.
screenshot 7
screenshot 8
screenshot 9
For IOS devices, the pointer selec on step may look different. Then it is
enough to make sure that the appropriate icons for the given standby
mode are flashing on the controller's display and that the appropriate
mode has been selected in the applica on. You should also remember
about the selec on of the appropriate mode in the applica on on
Android devices.
45