Press the bu on to turn on the heater. Press the same bu on again to turn off
the heater.
Switching the heater on and off
Set the me and day of the week before using the heater. To start se ng the me,
enter programmable mode by pressing the bu on un l programmable mode is
ac vated (le er P on the display). Then press the bu on on the screen the day
of the week will flash. Use the bu ons / to set the current day. Then press
the bu on and use the bu ons / to set the hour. Pressing the bu on
again starts the minute se ng, which you can change with the bu ons / .
Confirm the se ngs by pressing the bu on .
OPERATION
The default temperature shown on the display is temperature in the room. You can
set the hea ng temperature with the bu ons / . The temperature se ng
range is 12-42°C in economy mode and 15°C-45°C in comfort mode. In the an freeze
variant, the temperature cannot be changed.
Temperature se ng
Se ng the me and day of the week
The EWE+ heater has two modes: manual and programmable. Manual mode is
available in three variants:
comfort - the heater heats the room according to the set temperature,
economy - the heater heats the room to a temperature 3°C lower than that set in the
comfort variant, frost-free- the heater does not allow the temperature to drop
indoors below 5°C.
Press the bu on to enter manual mode:
- comfort
- economy
– frost-free
or programmable mode (le er P on the display)
Heater opera ng modes
38