Warmington Nouveau BBQ 900 Installation Instructions Manual Download Page 9

9 June 2017

 

Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notifi-

All Dimension are in mm……. Copyright on all products and Specifications © 

 

9

 

HEBEL HEAT CELL &CUT SIZES FROM PANELS for SN1250

 

The Hebel Heat cell is constructed around the firebox, using 75mm Hebel (see attached minimum spec below).  
 

(2400x600x75) Power Panels are required for basic heat cell construction as shown in detail “Firebox with Hebel Surround”. 

 

 
*

Visit the Warmington Web site for “HEBEL” instructions (PDF Download).. www.warmington.co.nz

 

Note: HEBEL KITSET ASSEMBLY Details….

 

When  purchasing  the  “Hebel  Heat  Cell  Kit”  the  assembly 

guide comes with the Kit . 
 

These Hebel Kits are not designed to be load bearing .

 

HEBEL HEAT CELL &CUT SIZES FROM PANELS for SN1500

 

The Hebel Heat cell is constructed around the firebox, using 75mm Hebel (see attached minimum spec below).  
 

(2400x600x75) Power Panels are required for basic heat cell construction as shown in detail “Firebox with Hebel Surround”. 

 

 
*

Visit the Warmington Web site for “HEBEL” instructions (PDF Download).. www.warmington.co.nz

 

Note: HEBEL KITSET ASSEMBLY Details….

 

When  purchasing  the  “Hebel  Heat  Cell  Kit”  the  assembly 

Guide will come with the Kit . 
 

These Hebel Kits are not designed to be load bearing .

 

*Note: If Solid Plastering the structure , it is recommended to use a Fibreglass Mesh with a Latex Based Solid Plaster 

to minimise the chance of the Solid Plaster cracking. (See your Solid Plasterer for correct materials and applications) .

 

Summary of Contents for Nouveau BBQ 900
















Reviews: