Warmington Nouveau BBQ 900, Installation Instructions Manual

Page: 5 / 15

9 June 2017
Due to continued product improvement, Warmington Ind LTD reserves the right to change product specifications without prior notifi-
All Dimension are in mm……. Copyright on all products and Specifications ©
5
Firebox SN
900
SN
1100
SN
1250
SN
1500
Frameout Clearance Width O 1170 1370 1490 1770
Frameout Clearance Depth P 665 690 800 800
Frameout Clearance Height Q 2230 2230 2230 2230
Hearth Width R 1450 1650 1650 1900
Hearth Projection S 380 380 850 850
Window Height V 1355 1430 1745 1745
Window Width W 1170 1370 1490 1770
Chimney Chase Clearance X 500 550 550 650
TIMBER FRAMING & TRIM OUT DETAILS
Important Notes:
All framing dimensions are internal only.
All timber framing & cladding must be con-
structed to suit an outdoor environment as
per NZ building code.
Firebox is recessed 40mm into Hebel Surround.
External air -
intake vent
required, 2x
100mm diame-
ter at the base
(CAITEC).
Warm air outlet
vent 2x 100mm
located at the top
of chimney chase
or heat cell, only
needed if venting
cone not used.
*Note: If Solid Plastering the structure , it is recommended to use a Fibreglass Mesh with a Latex Based Solid Plaster
to minimise the chance of the Solid Plaster cracking. (See your Solid Plasterer for correct materials and applications) .
Window
height ‘V’
must be
measured
from top of
hearth.
Hearth Height
MINIMUM HEAT CELL ALCOVE CLEARANCES & FRAME OUT
Note:
Centre Line of Flue is `NOT’ in
Centre of the Chimney Chase
Non - combustible
material must be
used on front face
of structure.
E.g. Promina
board, Superlux,
Hebel etc.
See Page 12 for
S/S Flashing
Detail & correct
Spigot Heights