26
STEP 6:
Test Spark Igniter and Push Button Module WITHOUT gas, making sure spark arcs from electricity to jet.
STEP 7:
Test with gas. Burner should light within 5 seconds or a few clicks.
STEP 5:
Crimp Spark
Igniter wires, then slide
crimped wires on to
connections using needle
nose pliers. Be careful
not to break connectors.
Wires can go in either
connection.
Mounting
Bracket
Push Button
Module
Spark Igniter Wires
Key Valve
Push Button Ignition
Key Valve
Push Button
Module
Washer #1
Washer #2
Nut
Button Cover
AAA Battery
STEP 4:
Install push
button module into
mounting bracket.
1) Unscrew button cover.
2) Remove plastic nut.
3) Insert washer #1onto
the button stem.
4) Insert push button
stem through mounting
bracket hole.
5) Insert washer #2.
6) Put on plastic nut and
turn until push button
control has been secured
to mounting bracket.
7) Insert AAA battery into
button stem.
8) Screw on button cover.
Mounting
Bracket
Button Stem
