Using the Advance
The ADVANCE facility allows you to bring forward the next ON
or OFF period without having to alter the programmed ON/
OFF times.
Press the ADVANCE button once and release. The word
ADVANCE will appear in the display.
If the programmer was originally ON it will now switch OFF and stay OFF until the next
programmed ON time.
The opposite will apply if the programmer was originally OFF.
In both cases the unit will then revert to the normal programme times.
If you wish to cancel the advance simply press the ADVANCE button again and the
word ADVANCE will disappear from the display.
Note
: The ADVANCE facility has no effect when the CH PROGRAMME indicator is in either
the 24 HOUR or OFF position.
Electronic equipment can, in exceptional
circumstances be affected by electrical interference.
If your programmers’ display or switching
programme becomes frozen or scrambled, or you
wish to revert to the factory pre-set programme you
can RESET your programmer by pressing the
MINUS(-) adjust button and the ENTER/HW
SELECT button together.
After using the RESET procedure you will need to re-programme the day and time of
day plus any changes you wish to make to the factory pre-set programme.
Reserve Battery
Your programmer is fitted with a NON-RECHARGEABLE LONG LIFE battery which
will maintain the programmed ON/OFF settings for a period in excess of two years.
This is more than sufficient to cover all the expected power interruptions during the life
of the unit.
Heating Systems
Information for use with various systems is available on request from Warmflow on
(028) 9262 1515.
Page 43
