Safety Pips K- User's manual
Part No.: 7100.181.K
_
Seite 4 von 4
V2020-12
n
Technical data
Power supply:
Power supply 230V / 50Hz
Connectors:
10 mm snap for coil cords
Contact ratings:
Max. voltage: 60 V
Max. current: 0.2 A
Max. power: 6 VA
Switch on time of signal contact:
ca. 1 s
Switch off time of signal contact:
ca. 5 s
Test voltage (open circuit)
DC < 0,01 Volt
AC < 4,00 Volt
Test current at 1,0 M
W
load:
DC < 0,01 µA
AC < 1,00 µA
Case:
ABS, black, dissipative
(except the name plate)
Operating conditions:
Temperature range: + 10 °C to + 40 °C
Relative humidity: 20 % to 80 %
Dimensions:
125 x 60 x 26 mm
Weight:
app. 85 g
n
Input impedances
Pass (green LED flashing)
Lower rated value:
1 MOhm -10 %
Upper rated value:
100 pF + 2 MOhm +10 %
Fault condition (red LED and beep)
Lower rated value (permanent red):
400 kOhm
Upper rated value (flashing red):
5 MOhm
n
Input impedances for control input B
Pass (green LED flashing)
Upper rated value:
100 Ohm
n
Waste disposal
According to WEEE Directive 2012/19/EU the device is marked with this symbol.
This device must therefore not be disposed of with the household waste.
