20
6.1. CLEANING OF AIR FILTER (beweekly)
Dust collects in the filter and restricts airflow. The restricted airflow reduces the efficiency
of the system. A filled filter may block airflow and cause damage of the system.
The air filter requires regular cleaning. It is removable for easy cleaning. Never operate the
unit without air filter, because evaporator may be contaminated.
1. Press POWER button to switch off the unit and unplug the main lead.
2. Remove the filter mesh from the unit.
3. Use a vacuum cleaner to suck dust from the filter.
4. Turn the filter over and rinse the air filter under floating water. Allow water to
penetrate the filter in the opposite direction of air flow. Allow filter to air dry
completely before reinstalling.
WARNING!!!
Do not touch the evaporator surface with
bar-hand. It might cause injury of your
fingers.
6.2. CLEANING UP OF COOLANT
GENERAL MEASURES:
1. Gas/vapor is heavier than air and may accumulate in confined spaces. Particularly at
our below ground level.
2. Eliminate any source of ignition.
3. Use appropriate personal protection equipment (PPE).
4. Evacuate uninvolved personnel, block, and ventilate area.
5. Avoid contact of coolant with eyes, skin or clothing. Never inhale gas or vapor.
6. Prevent contact with public water supply.
7. Close the emersion point in case of safe approach. Consider use of water spray to
disperse vapor.
8. Isolate the area until gas has dispersed. Ventilate and gas test area before entering.
Contact competent authorities after a spill.
6. CLEANING AND CARE
