4
5
GROUNDING INSTRUCTIONS
t 'PSZPVSQSPUFDUJPO8BSJOH
®
blenders are equipped with a 3-conductor
cordset having a molded 3-prong grounding-type plug, and should be
used in combination with a properly connected grounding-type outlet as
TIPXOJO'JHVSF"*GBHSPVOEJOHUZQFPVUMFUJTOPUBWBJMBCMFBOBEBQUFS
BTTIPXOJO'JHVSF#NBZCFVTFEUPFOBCMFBTMPUXBMMPVUMFUUPCF
used with a 3-prong plug.*
"TTIPXOJO'JHVSF$UIFBEBQUFSNVTUCFHSPVOEFECZBUUBDIJOHJUT
grounding lug under the screw of the outlet cover plate.
$"65*0/#FGPSFVTJOHBOBEBQUFSJUNVTUCFEFUFSNJOFEUIBUUIF
PVUMFUDPWFSQMBUFTDSFXJTQSPQFSMZHSPVOEFE*GJOEPVCUDPOTVMUB
licensed electrician.
Never use an adapter unless you are sure it is properly grounded.
*NOTE:
Use of an adapter is not permitted in Canada.
NOTE:
User-installed cord set plugs are not permitted in Europe.
MX1300XTX/MX1300XTP/MX1300XTS & MX1500XTX/MX1500XTP/MX1500XTS
BLENDER SPECIFICATIONS
t $BQBDJUZP[8PSLJOH$BQBDJUZ P[DBQBDJUZXJUI.9951
MX1500XTP versions)
t 4XJUDI4FUUJOHT3FQSPHSBNNBCMF
t 7BSJBCMF.PUPS4QFFE.JOJNVN31.T.BYJNVN31.T
(30,000 RPM with Pulse)
t 3BUJOH7PMUT"NQT
t #BTF.BUFSJBM1PMZDBSCPOBUF
t 1PMZDBSCPOBUF4PVOE&ODMPTVSFJODMVEFEXJUI.9959.9951
MX1500XTS versions only
t #FBSJOH)JHI1SFDJTJPO#BMM#FBSJOH
t $PSE'PPU5ISFF$POEVDUPS(SPVOE$PSFXJUI4USBJO3FMJFGJO#BTF
t 0WFSBMM)FJHIU*ODIFT
t 0QFSBUJOH$ZDMFNJOVUF0/NJOVUFT0''
t 8FJHIUMCT
t
C
ETL
US
/4'MJTUFE
OPERATION
1MVHUIFQPXFSDPSEJOUP"$PVUMFU1SFTTUIF0O0GG
button to
turn the unit on. The blue LCD backlight will turn on and the words
8"3*/($0..&3$*"-XJMMBQQFBSJOEJDBUJOHUIBUUIFQPXFSJTPO
After 5 seconds, the blender enters standby mode.
NOTE:
*OTUBOECZNPEFUIFCMFOEFSJTBXBJUJOHEJSFDUJPOTBOEXJMMSFBE
13&44"/:#6550/50#-&/%
2. The motor speed can be adjusted by pressing the
or
Speed
buttons. Speed ranges from 15% to 100%.
100% 20,000
RPMs
50% 10,000
RPMs
15% 3,000
RPMs
The Speed Up
button will increase the motor speed display in 1%
increments and the Speed Down
button will decrease the motor
TQFFEEJTQMBZJOJODSFNFOUT)PMEJOHEPXOFJUIFSCVUUPOXJMMRVJDLMZ
scroll through speeds.
Using the Speed Up
and Speed Down
buttons, set desired motor
TQFFE*GOPTQFFEJTTFMFDUFENPUPSXJMMEFGBVMUUP
NOTE:
5IFNPUPSEPFTOPUSVOBUUIFOFXMZTFUTQFFEVOUJMUIF4UBSU
Stop
CVUUPOJTQSFTTFE*G4UBSU4UPQ
button is not pressed
XJUIJOTFDPOETUIFOFXTQFFETFUUJOHXJMMCFTUPSFEGPSOFYUVTFBOE
the blender will return to standby mode; the display will once again read
13&44"/:#6550/50#-&/%
1SFTT4UBSU4UPQ
CVUUPOUPUVSOUIFCMFOEFSPO#MFOEFSXJMMSVO
continuously at the set speed. The LCD will display the motor speed in
percentage. Default speed (percentage) is at 100%. Motor speed can be
changed while blender is running by simply pressing Speed Up
or
Speed Down
button.
5PTUPQDPOUJOVPVTCMFOEJOHPQFSBUJPOQSFTT4UBSU4UPQ
button or
press any of the program buttons.
PULSE FEATURES
Your unit comes equipped with two Pulse options: Normal Pulse
and
.BYJNVN1VMTF
.
Note:
The Pulse buttons are momentary switches –
once released, the unit will shut off.
5PVTF.BYQVMTFPQUJPOQSFTTUIF
button. This will run the motor
at 150% speed. The LCD will read MAX PULSE SPEED: 150%.
2. To use Normal pulse option, press the
button. This will run the motor
BUTQFFE5IF-$%XJMMSFBE/03.16-4&41&&%
3. The blender allows you to set the pulse to your desired speed. While
blending at Normal pulse speed, the motor can be adjusted. To do this,
hold the
Pulse button and press Speed Up
or Speed Down
www.
GlobalTestSupply
.com
Find Quality Products Online at:
