background image

12

Such items must be clearly identified as having been sterilized, 
both by a tag on the item itself and by a statement in the 
accompanying correspondence. Waring will not accept delivery 
of any return unless it is so identified.

Replacement parts for your out-of-warranty repairs are obtainable 
at the address below.

WARRANTY

LIMITED TWO YEAR MOTOR WARRANTY 
LIMITED ONE YEAR PARTS AND LABOR WARRANTY

 

(U.S. and Canada Only)

Waring warrants every new Waring

®

 Commercial Blender to be 

free from defects in material and workmanship for a period of 
one year from the date of purchase when used with foodstuffs, 
nonabrasive liquids (other than detergents) and nonabrasive 
semiliquids, providing it has not been subject to loads in excess 
of the indicated rating. In addition, the motor in this appliance has 
a full two year warranty.

Under this warranty, Waring will repair or replace any part that, 
upon our examination, is defective in materials or workmanship, 
provided the product is delivered prepaid to the Waring Service 

This warranty does not: a) apply to any product that has become 
worn, defective, damaged or broken due to misuse or due to 
repairs or servicing by other than the Waring Service Center or 
a Factory Approved Service Center, or due to abuse, misuse, 
overloading or tampering; or b) cover incidental or consequential 
damages of any kind.

The warranty is applicable only to appliances used in the United 
States or Canada; this supersedes all other express product 
warranty or warranty statements. For Waring products sold 
outside of the U.S. and Canada, the warranty is the responsibility 
of the local importer or distributor. This warranty may vary 
according to local regulations.

Warning: 

This warranty is void if appliance is used on Direct

Current (DC).

www.calcert.com

[email protected]

1.888.610.7664

0

5

10

15

20

25

30

Summary of Contents for Torq 2.0 TBB Series













Reviews: