Battery Charging
To ensure the best performance and maximum battery life, we recommend frequent battery charging.
Your P2GO Turnmate comes with an on-board battery charger for your ease and convenience.
The console battery display makes charging simple and easy.
Follow these steps for battery charging.
Only when the battery is properly charged is the right-most green LED lit. As the battery’s state-of-
charge decreases, successive LEDs light up, only one on at a time. The 3
rd
from left red LED flashes
indicating ‘energy reserve’ (70% depth of discharge). The 3 left-most LEDs alternately flash, indicating
‘empty’ (805 depth of discharge).
2. On a level dry surface, turn off the power key and plug the AC cord into the charger socket located on
the fibre-glass compartment. Plug the other end of the AC cord into a grounded wall outlet.
3. Charge the battery for 6-8 hours depending on the usage before charging. Disconnect the AC cord,
insert key into tiller and check if all green lights are on.
4. There is no possible way to overcharge the battery since the charging voltage in the floating stage is set
constant. In general, you may start charging after work and disconnect the next morning.
WARNING
You must turn OFF power before charging. Otherwise it may damage the electric circuit.
