Operation
1.
Turn ON Power
Insert the power key into the switch lock and turn clockwise to the “ON” position.
All the battery display lights should be on indicating the batteries are full and ready to
work.
2.
Check the Status
The status light should be on steadily if the electric and driving systems are OK.
If it flashes, check the clutch engagement first located near the drive wheels.
3.
Forward Motion
Start you P2GO Turnmate. Stand behind the tiller and hold the ‘bull-horns’ with two
hands. Look straight ahead. Press the upward throttle lever with your thumbs slowly to
start moving forward. The speed should increase as you press more.
4.
Stop
Slowly releasing your thumbs from the throttle lever will reduce the speed and stop the
cart.
5.
Emergency Stop
Just simply release your thumbs quickly. The Turnmate should stop within 4.5 feet at full
forward speed.
6.
Reverse Motion
Press the downward throttle lever with your thumbs slowly to start moving in reverse.
7.
Forward Steering
Look straight ahead. When you need to turn right, you turn the ‘Caster’ to the left. Vise a
Versa for the left turn.
8.
Reverse Steering
The operation is the opposite to forward steering.
9.
Move Manually (Free Wheeling)
Manual:
You push or pull the Turnmate by disengaging the clutch in the transaxle.
Power:
You can push or pull the Turnmate by pressing the yellow free-wheel button by
your right hand finger and operating by your left hand.
WARNING
Before you operate, practice in an open area for
at least one hour
to get familiar with the Turnmate and
gain the operation skills. The brake may not be effective when engaged on inclines greater than the grade
with allowed load. Be alert!
EMERGENCY STOP
In case of out-of-control, turn the power off or pull safety button immediately!
