Installation
[M2001452_0] - EN / 22.06.12
Page 10 of 20
Subject to change without notice
3.2
Unpacking the external venetian blind
)
NOTE
Find another use for the discarded packaging
material or take it to your local recycling centre.
CAUTION
Risk of product damage from failure to exer-
cise care when unpacking!
Be careful not to damage the lifting and
tilting tapes when removing the packaging
material.
Remove the packaging material (plastic
film) of the blind at the top rail.
Carefully unpack the external venetian blind and
individual parts.
)
NOTE
Remove the spacers between the top rail and the
slats.
Dispose of the packaging material correctly.
3.3
Scope of delivery
Check the scope of delivery.
)
NOTE
Check the scope of delivery using the delivery
note.
Check the parts to make sure they are not
damaged.
If any items are damaged or not as specified in
the order, stop the installation and contact
WAREMA.
External venetian blind with auxiliary motor
Tension cable bracket
Instructions/handover report
Battery pack
Fixing material
Parts description
n x
Top rail bracket
(number depends on the width, see
Tab. 7/p. 12)
1 x
Emergency push button
1 x
Battery-operated control
Tab. 5:
Overview of additional parts delivered for external
venetian blind with auxiliary motor and battery-
operated emergency retraction set
3.4
Marking the position of the external ve-
netian blind
d
d
2
0
0
0
0
5
2
4
1
H
External venetian blind
height
Fig. 2:
Dimensional drawing for external venetian blind
with auxiliary motor and battery-operated
emergency retraction set (all dimensions in mm)
