Operating the markisolette
[B816784_1] - EN / 23.11.06
Page 5 of 12
Subject to change without notice.
3.2
Electric motor
Extending/retracting with turn or push-button switch
Extending/retracting with snap-in switch
dd200000126_7
Press and hold the (UP)
button or (DOWN) button or
turn the toggle switch to the
left or right and hold.
The markisolette moves in the
selected direction. The
markisolette stops when the
key or toggle switch is
released.
The markisolette can be
stopped in any position. The
end position of the markisolette
is limited in both directions of
movement, i.e. the markisolette
automatically stops at this
point.
dd200000126_7
Press the (UP) button or
(DOWN) button or
turn the toggle switch to the
left or right.
The markisolette moves in the
selected direction. The
markisolette is stopped by
pressing the stop key, pressing
the key for the opposite
direction or returning the toggle
switch.
The markisolette can be
stopped in any position. The
end position of the markisolette
is limited in both directions of
movement, i.e. the markisolette
automatically stops at this
point.
Extending/retracting with automatic control
Information for motor runtime
The operation is explained in a separate manual.
A wide range of
control devices
is available for our sun
protection systems to give you optimum control of the
markisolette. Please contact your qualified specialist for
further information.
CAUTION
Product damage! The automatic control may
fail under extreme conditions (e.g. power failure
or defects).
Set the automatic control to manual if you
are going to be away.
The motors used in these products are not intended for
continuous operation. The integrated thermal protection will
switch the motor off after approx. 4 minutes. The product
will be ready for use again after approx. 10-15 minutes.
