background image

4

Warranty

Pre-Installation

SPECIFICATIONS

Fan size

Speed

Volts

Amps

Watts

RPM

CFM N.W. G.W. C.F.

NOTE: These are approximate measures. They do not
include amps and wattage used by the light kit.

TOOLS REQUIRED

Phillips

screwdriver

Flat blade

screwdriver

Electrical

tape

Wire
stripper

Step
ladder

Level1

Level2

Level3

120

52"

The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime
after the date of purchase by the original purchaser. The supplier warrants that the light kit, excluding any glass, to be free from defects in
workmanship and material at the time of shipment from the factory for a period of three years after the date of purchase by the original purchaser.
The supplier also warrants that all other fan parts,excluding any glass or acrylic blades, to be free from defects in workmanship and material at the

time of shipment from the factory for a period of one year after the date of purchase by the original purchaser. We agree to correct such defects
without charge or at our option replace with a comparable or superior model if the product is returned. To obtain warranty service, you must present
a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your responsibility. Damage to any part, such as by
accident, misuse, improper installation, or by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions this
warranty does not cover any changes in brass finish, including rusting,pitting,corroding,tarnishing,or peeling. Brass finishes of this type give their

longest useful life when protected from varying weather conditions. A certain amount of "wobble" is normal and should not be considered a defect
Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Interline hereby disclaims any
and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by law. The
duration of any implied warranty, which cannot be disclaimed, is limited to the time period as specified in the express warranty. Some states do not
allow a limitation on how long an implied warranty lasts,so the above limitation may not apply to you. The retailer shall not be liable for incidental,
consequential,or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law.
Some states do not allow the exclusion of incidental or consequential 6damaaes, so the above exclusion or limitation may not apply to you. This
warranty gives specific legal rights, and you may also have other rights that vary from state to state. This warranty supersedes all prior warranties.
Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer..

0.22

12

72

1620

0.32

26

120

2650

0.45

54

175

4870

19.6Ib

8.9kg

23.1Ib

10.5kg

3.67
cu.ft

Summary of Contents for AL02P01
















Reviews: